- 產品與解決方案
- 行業解決方案
- 服務
- 支持
- 合作夥伴
- 關於我們
02-FAT模式切換為FIT模式操作指導
本章節下載： 02-FAT模式切換為FIT模式操作指導 (242.03 KB)
FAT模式切換為FIT模式操作指導
Copyright © 2021 bobty下载软件 版權所有，保留一切權利。
非經本公司書麵許可，任何單位和個人不得擅自摘抄、複製本文檔內容的部分或全部，並不得以任何形式傳播。
除bobty下载软件 的商標外，本手冊中出現的其它公司的商標、產品標識及商品名稱，由各自權利人擁有。
本文檔中的信息可能變動，恕不另行通知。
AP的工作模式由FAT模式切換為FIT模式時，配置文件會被清空，請備份當前版本FAT AP的配置文件。
圖1-1 AP的工作模式切換示意圖（FAT切FIT）
AP設備上電和重新啟動的過程中，在配置終端的屏幕上首先將顯示：
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing.................................
...Done.
****************************************************************************
* *
* H3C WA5530 BootWare, Version 7.09 *
* *
****************************************************************************
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd.
Compiled Date : Jun 23 2017
CPU Type : ARM
CPU L1 Cache : 32KB
CPU L2 Cache : 256KB
CPU Clock Speed : 710MHz
Memory Type : DDR3 SDRAM
Memory Size : 512MB
Memory Speed : 667MHz
Flash Size : 128MB
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
當出現“Press Ctrl+B to access EXTENDED-BOOTWARE MENU...”時，鍵入<Ctrl+B>，係統進入BootWare主菜單：
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9):
該菜單含義如下：
|
菜單項 |
說明 |
|
<1> Boot System |
引導啟動文件 |
|
<2> Enter Serial SubMenu |
進入串口子菜單 |
|
<3> Enter Ethernet SubMenu |
進入以太網子菜單 |
|
<4> File Control |
文件控製子菜單 |
|
<5> Restore to Factory Default Configuration |
恢複設備的出廠配置 |
|
<6> Skip Current System Configuration |
跳過當前配置進行啟動，隻是本次生效。該功能一般在用戶丟失口令之後使用 |
|
<7> BootWare Operation Menu |
BootWare操作子菜單 BootWare程序會隨設備啟動文件的升級而同步升級，不推薦用戶單獨升級BootWare程序 |
|
<8> Skip Authentication for Console Login |
清除Console口登錄密碼 |
|
<9> Storage Device Operation |
存儲設備控製菜單，用於存儲設備的選擇 |
|
<0> Reboot |
重新啟動設備 |
|
Ctrl+Z: Access EXTENDED ASSISTANT MENU |
進入BootWare擴展菜單 |
|
Ctrl+F: Format File System |
格式化文件係統 |
|
Ctrl+C: Display Copyright |
顯示版權信息 |
|
Ctrl+Y: Change AP Mode |
切換AP模式 |
在BootWare主菜單下鍵入<Ctrl+F>，並輸入“Y”格式化存儲介質：
Warning:All files on flash will be lost! Are you sure to format? [Y/N]Y.....
............................................................................
..................
Format success.
在BootWare主菜單下鍵入<Ctrl+Y>，可以進入AP模式切換菜單，係統顯示如下：
Please select the new mode
Current mode is Fat
============================================================================
|NO. Mode |
|1 Fat Mode |
|2 Fit Mode |
|0 Exit |
============================================================================
Enter your choice(0-2):
在AP模式切換菜單下鍵入<2>，將會切換AP的工作模式為FIT模式。
Enter your choice(0-2):2
Changed to fit mode successfully!
切換成功後，需要加載FIT AP版本啟動，請通過BootWare菜單或者AC下載版本，詳細操作請參見1.2 通過BootWare菜單方式升級設備或者1.3 通過AC直接下載FIT AP版本進行自動升級。
1. 進入BootWare主菜單
AP設備上電和重新啟動的過程中，在配置終端的屏幕上首先將顯示：
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing.................................
...Done.
****************************************************************************
* *
* H3C WA5530 BootWare, Version 7.09 *
* *
****************************************************************************
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd.
Compiled Date : Jun 23 2017
CPU Type : ARM
CPU L1 Cache : 32KB
CPU L2 Cache : 256KB
CPU Clock Speed : 710MHz
Memory Type : DDR3 SDRAM
Memory Size : 512MB
Memory Speed : 667MHz
Flash Size : 128MB
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
當出現“Press Ctrl+B to access EXTENDED-BOOTWARE MENU...”時，鍵入<Ctrl+B>，係統進入BootWare主菜單：
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9):
2. 進入以太網口子菜單
在BootWare主菜單下鍵入<3>，可以進入以太網口子菜單，係統顯示如下：
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-5):
以太網口子菜單中各選項解釋如下：
表1-2 以太網口子菜單
|
菜單項 |
說明 |
|
|
<1> Download Image Program To SDRAM And Run |
下載啟動文件到內存並啟動 |
|
|
<2> Update Main Image File |
升級主啟動文件 |
|
|
<3> Update Backup Image File |
升級備份啟動文件 |
|
|
<4> Download Files(*.*) |
下載啟動文件到存儲 |
|
|
<5> Modify Ethernet Parameter |
修改以太網口參數 |
|
|
<0> Exit To Main Menu |
返回BootWare主菜單 |
|
3. 修改以太網口參數
在以太網口子菜單下鍵入<5>，可以修改以太口參數，係統顯示如下：
==========================<ETHERNET PARAMETER SET>==========================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :tftp
Load File Name :wa5300.ipe
:
Target File Name :wa5300.ipe
:
Server IP Address :192.168.0.2
Local IP Address :192.168.0.50
Subnet Mask :0.0.0.0
Gateway IP Address :0.0.0.0
表1-3 以太網參數設置說明
|
顯示 |
說明 |
|
'.' = Clear field |
快捷鍵：“.”表示清除當前輸入 |
|
'-' = Go to previous field |
快捷鍵：“-”表示返回到前一個參數域 |
|
Ctrl+D = Quit |
快捷鍵：表示退出參數配置界麵 |
|
Protocol (FTP or TFTP) |
使用的傳輸協議，可以為FTP或者TFTP |
|
Load File Name |
下載文件名，要與下載的實際文件名一致 |
|
Target File Name |
存儲的目標文件名。缺省情況下與服務器端文件名一致 |
|
Server IP Address |
TFTP/FTP服務器的IP地址 |
|
Local IP Address |
本地IP地址，為TFTP/FTP客戶端設置的IP地址 |
|
Subnet Mask |
本地IP地址的子網掩碼 |
|
Gateway IP Address |
網關IP地址。當與服務器不在同一網段時需要配置網關地址。 |
|
FTP User Name |
FTP用戶名，傳輸協議為TFTP時，無此選項 |
|
FTP User Password |
FTP用戶密碼，傳輸協議為TFTP時，無此選項 |
4. 進行版本下載
以升級主啟動文件為例，鍵入<2>升級主啟動文件：
Loading.....................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
.......................................................Done.
37386240 bytes downloaded!
Image file wa5300-boot.bin is self-decompressing...
Saving file flash:/wa5300-boot.bin ................Done.
Image file wa5300-system.bin is self-decompressing...
Saving file flash:/wa5300-system.bin ...................................
........................................................Done.
選擇<0>，返回BootWare主菜單：
Enter your choice(0-5): 0
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9):
選擇<1>，引導係統：
Enter your choice(0-9): 1
Loading the main image files...
Loading file flash:/wa5300-system.bin.................................
Done.
Loading file flash:/wa5300-boot.bin........Done.
Image file flash:/wa5300-boot.bin is self-decompressing.................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
......................Done.
System image is starting...
Startup configuration file doesn't exist or is invalid.
Line con0 is available.
Press ENTER to get started.
圖1-2 通過AC下載FIT AP版本的升級環境
(1) 在AC上配置對應型號的AP的模板，並開啟版本升級功能
# 創建ap10，型號為WA5530。
<Sysname> system-view
[Sysname] wlan ap ap10 model WA5530
# 配置AP的序列號。
[Sysname-wlan-ap-ap10] serial-id 219801A0YF916CG02501
# 開啟AP版本升級功能。
[Sysname-wlan-ap-ap10] firmware-upgrade enable
[Sysname-wlan-ap-ap10] quit
(2) AC上啟動DHCP服務
# 開啟DHCP服務。
[Sysname] dhcp enable
# 創建DHCP地址池並進入DHCP地址池視圖。
[Sysname] dhcp server ip-pool dhcp1601
# 配置DHCP地址池動態分配的IP地址網段。
[Sysname-dhcp-pool-dhcp1601] network 192.168.0.0 mask 255.255.255.0
[Sysname-dhcp-pool-dhcp1601] gateway-list 192.168.0.1
[Sysname-dhcp-pool-dhcp1601] quit
# 完成上述配置後，AP會自動下載版本，在AC上通過display wlan ap name ap10命令可以查看AP的狀態為正在下載版本。
<Sysname> display wlan ap name ap10
AP information
State : I = Idle, J = Join, JA = JoinAck, IL = ImageLoad
C = Config, DC = DataCheck, R = Run, M = Master, B = Backup
AP name APID State Model Serial ID
ap10 3 IL WA5530 219801A0YF916CG02501
# AP版本下載完畢後，在AC上通過display wlan ap name ap10命令可以查看AP已經在AC上線。
<Sysname> display wlan ap name ap10
AP information
State : I = Idle, J = Join, JA = JoinAck, IL = ImageLoad
C = Config, DC = DataCheck, R = Run, M = Master, B = Backup
AP name APID State Model Serial ID
ap10 3 R/M WA5530 219801A0YF916CG02501
不同款型規格的資料略有差異, 詳細信息請向具體銷售和400谘詢。H3C保留在沒有任何通知或提示的情況下對資料內容進行修改的權利!
支持
