3 配置步驟

#在SWA上創建vlan 100和vlan 200，將vlan 100與192.168.100.0/24網段綁定，vlan 200與192.168.200.0/24網段綁定。

<SWA> system-view

[SWA] vlan 100

[SWA-vlan100] ip-subnet-vlan ip 192.168.100.0 255.255.255.0

[SWA-vlan100] quit

[SWA] vlan 200

[SWA-vlan200]ip-subnet-vlan ip 192.168.200.0 255.255.255.0

[SWA-vlan200] quit

#將GE1/0/1的端口類型配置為hybrid，並使其在發送vlan 100和vlan 200的報文時去掉vlan tag。 

[SWA] interface gigabitethernet 1/0/1

[SWA-GigabitEthernet1/0/1] port link-type hybrid

[SWA-GigabitEthernet1/0/1] port hybrid vlan 100 200 untagged

#將GE1/0/1與基於子網的vlan關聯

[SWA-GigabitEthernet1/0/1] port hybrid ip-subnet-vlan vlan 100

[SWA-GigabitEthernet1/0/1] port hybrid ip-subnet-vlan vlan 200

[SWA-GigabitEthernet1/0/1] quit

#配置SWA的上聯口GE1/0/2為trunk口，允許vlan 100和vlan 200通過。

[SWA] interface gigabitethernet 1/0/2

[SWA-GigabitEthernet1/0/2] port link-type trunk

[SWA-GigabitEthernet1/0/2] port trunk permit vlan 100 200

[SWA-GigabitEthernet1/0/2] quit

4 驗證配置

#在SWA上查看所有子網VLAN的信息

<SWA>dis ip-subnet-vlan vlan all

 VLAN ID: 100

  Subnet index     IP address      Subnet mask

  0                192.168.100.0   255.255.255.0

 VLAN ID: 200

  Subnet index     IP address      Subnet mask

  0                192.168.200.0   255.255.255.0

#在SWA上查看顯示端口GigabitEthernet1/0/1關聯的子網VLAN的信息。

<SWA>dis ip-subnet-vlan int g1/0/1

 Interface: GigabitEthernet1/0/1

  VLAN ID   Subnet index    IP address       Subnet mask       Status  

  100       0               192.168.100.0    255.255.255.0     Active

  200       0               192.168.200.0    255.255.255.0     Active