引入流量分析係統，如何給交換機s12508板卡配置流量分析，有無文檔指導

鏡像流：需要ACL與QOS配合

[H3C]acl basic 2000

[H3C-acl-ipv4-basic-2000]rule 0 permit source any

[H3C-acl-ipv4-basic-2000]quit

[H3C]traffic classifier 1

[H3C-classifier-1]if-match acl 2000

[H3C-classifier-1]quit

[H3C]traffic behavior 1

[H3C-behavior-1]mirror-to interface GigabitEthernet 1/0/1 //指定監控口

[H3C-behavior-1]mirror-to interface GigabitEthernet 1/0/2

[H3C-behavior-1]quit

[H3C]qos policy 1

[H3C-qospolicy-1]classifier 1 behavior 1

[H3C-qospolicy-1]quit

[H3C]int gi 1/0/24 //將QOS應用到的端口將會是鏡像源端口

[H3C-GigabitEthernet1/0/24]qos apply policy 1 inbound

[H3C-GigabitEthernet1/0/24]qos apply policy 1 outbound

[H3C-GigabitEthernet1/0/24]quit