如何將WAP712c-LI切換成胖ap，這個ap是雲ap，跟普通的不太一樣
- 1關注
- 1收藏，3441瀏覽
最佳答案
1.1.1 在bootware下進行升級
在設備重啟過程中按ctrl+B鍵，進入bootware
依次按照如下步驟進行升級
首先選3，進入以太菜單
接著，選5進入ftp或者tftp，配置ftp或者tftp服務器，拷貝版本
下一步，選2，更新主版本文件
接下來，版本解壓完成後，退回到主菜單，並重啟設備，即可完成版本更新
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 3
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-5): 5
==========================<ETHERNET PARAMETER SET>==========================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :ftp -------------------------------選擇通過ftp或者tftp拷貝版本，本例選擇ftp
Load File Name :wa5300-fat.ipe------------------要拷貝的版本名字
:
Target File Name :wa5300-fat.ipe -------------------拷貝到設備上後的文件命名，可根據需要修改
:
Server IP Address :5.0.0.157 5.0.0.184 --------ftp server的地址
Local IP Address :105.1.108.152 5.0.0.157 ------------設備ip地址
Subnet Mask :0
Gateway IP Address :0
FTP User Name :123 123 ---------------------ftp 用戶名
FTP User Password :****** ****** --------------------ftp密碼
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-5): 2
Loading.....................................................................
............................................................................
............................................................................
.............................................................Done.
40704000 bytes downloaded!
The file is exist,will you overwrite it? [Y/N]Y
Image file wa5300-fat-boot.bin is self-decompressing...
Saving file flash:/wa5300-fat-boot.bin ..............................Done.
Image file wa5300-fat-system.bin is self-decompressing...
Saving file flash:/wa5300-fat-system.bin ...................................
............................................................................
....................................................Done.
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-5): 0
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 0
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extended
BootWare
- 2019-09-12回答
- 評論(2)
- 舉報
-
(0)
好像不對吧，聽說是要升級boot的版本
親~登錄後才可以操作哦!
確定你的郵箱還未認證，請認證郵箱或綁定手機後進行當前操作
舉報
×
侵犯我的權益
×
侵犯了我企業的權益
×
- 1. 您舉報的內容是什麼？（請在郵件中列出您舉報的內容和鏈接地址）
- 2. 您是誰？（身份證明材料，可以是身份證或護照等證件）
- 3. 是哪家企業？（營業執照，單位登記證明等證件）
- 4. 您與該企業的關係是？（您是企業法人或被授權人，需提供企業委托授權書）
抄襲了我的內容
×
原文鏈接或出處
誹謗我
×
- 1. 您舉報的內容以及侵犯了您什麼權益？（請在郵件中列出您舉報的內容、鏈接地址，並給出簡短的說明）
- 2. 您是誰？（身份證明材料，可以是身份證或護照等證件）
對根叔社區有害的內容
×
不規範轉載
×
舉報說明
操作參考案例：https://zhiliao.h3c.com/Theme/details/71191