1.進入slot0
2.保存配置提示沒有足夠的空間保存配置
3.查看dir flash:/什麼也沒有
slot 0版本信息如下:
H3C Comware Platform Software
Comware Software, Version 5.20, Release 2607P49
Copyright (c) 2004-2016 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
H3C WX5540E-LSW uptime is 0 week, 3 days, 2 hours, 21 minutes
H3C WX5540E-LSW with 2 Processors
1024M bytes DDR3
16M bytes Nor Flash Memory
Config Register points to Nor Flash
Hardware Version is Ver.B
CPLDA Version is 006, CPLDB Version is 004
BootRom Version is 1.12
[SubSlot 0] 12GE+12SFP+4SFP Plus Hardware Version is Ver.B
slot 1版本信息如下:
H3C Comware Platform Software
Comware Software, Version 5.20, Release 2609P55
Copyright (c) 2004-2016 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
H3C WX5540E uptime is 0 week, 0 day, 0 hour, 2 minutes
H3C WX5540E with 1 RMI XLP 432 1400MHz Processor
8192M bytes DDR3
16M bytes Flash Memory
4002M bytes CFCard Memory
Hardware Version is Ver.B
FPGA1 Hardware Version is Ver.A
FPGA2 Hardware Version is Ver.A
CPLD 1 CPLD Version is 006
CPLD 2 CPLD Version is 004
FPGA1 Logic Version is 323
FPGA2 Logic Version is 323
Basic Bootrom Version is 1.12
Extend Bootrom Version is 1.12
[Slot 0]WX5540ELSW Hardware Version is NA
[Slot 1]WX5540ERPU Hardware Version is Ver.B
==========================================================
===============display device verbose===============
==========================================================
Slot No Board Type Status Max Ports
0 WX5540ELSW Normal -
1 WX5540ERPU Normal 5
(0)
磁盤空間不足
<H3C>save ---------------------交換板模式下
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/config.cfg]
(To leave the existing filename unchanged, press the enter key): Validating file.
Please wait... Not enough disk space to save the configuration file!
Failed to save the current configuration.
Not enough disk space to save the configuration file!
表示沒有足夠的存儲空間去保存配置文件,通過dir查看flash也提示下麵的報錯,設備沒有格式化。
<H3C>dir
% Unformatted device
指導現場按照下麵步驟操作問題解決。
1.先備份交換板的配置,可以通過記錄會話保存下來
2.<H3C>fixdisk flash:用命令恢複存儲空間,然後重新再測試,看是否能dir看到flash,保存配置是否正常
3.格式化交換板fomat flash ,重啟sw板
(0)
親~登錄後才可以操作哦!
確定你的郵箱還未認證,請認證郵箱或綁定手機後進行當前操作
舉報
×
侵犯我的權益
×
侵犯了我企業的權益
×
抄襲了我的內容
×
原文鏈接或出處
誹謗我
×
對根叔社區有害的內容
×
不規範轉載
×
舉報說明
暫無評論