如圖如果固定出口IP

我建立了2個出口地址池

[H3C]dis nat address-group
NAT address group information:
Totally 2 NAT address groups.
Address group ID: 1
Port range: 1-65535
Address information:
 Start address         End address
100.100.100.1         100.100.100.253
Exclude address information:
  Start address         End address
   ---                   ---
 Address group ID: 2
Port range: 1-65535
Address information:
Start address         End address
 100.100.200.1         100.100.200.253
 Exclude address information:
Start address         End address
在防火牆出口1/0/1和1/0/0引用

interface GigabitEthernet1/0/1
port link-mode route
 combo enable copper
ip address 100.100.100.1 255.255.255.0
nat outbound address-group 1
--------------------------------
interface GigabitEthernet1/0/0
port link-mode route
combo enable copper
 ip address 100.100.200.1 255.255.255.0
nat outbound address-group 2

我要怎麼寫策略路由才能讓內部兩個PC，訪問公網（200.200.200.254）一個走100.100.100.2，一個走100.100.100.3呢
我怎麼寫都無法生效。。。。。