以下是具體配置,秘鑰和路由都是通的,哪位老師幫忙解答下感謝!
ntp-service enable |
ntp-service authentication enable |
ntp-service authentication-keyid 1 authentication-mode md5 simple ntp1 |
ntp-service unicast-server 10.184.18.1 vpn-instance MGMT authentication-keyid 1 source M-GigabitEthernet0/0/0 |
ntp-service unicast-server 10.184.18.5 vpn-instance MGMT authentication-keyid 1 source M-GigabitEthernet0/0/0 priority |
ntp-service source M-GigabitEthernet0/0/0 |
(0)
最佳答案
1、確保VPN實例已經正確配置,並且NTP流量可以通過該實例。確認VPN實例與接口的綁定配置正確。
2、驗證NTP服務器的IP地址、域名解析(VPN下可能不同)以及端口(UDP 123)是否在正確的VPN實例中。確保從配置的VPN實例可以訪問到指定的NTP服務器。
3、確保NTP密鑰ID的創建和使用是正確的,密鑰內容一致。確保使用同一密鑰ID進行NTP服務器配置。
4、確保VPN實例和NTP服務器的安全配置沒有衝突。檢查防火牆或ACL規則是否可能阻止NTP流量。
5、檢查VPN實例與NTP服務器之間的路由是否正確。
(0)
親~登錄後才可以操作哦!
確定你的郵箱還未認證,請認證郵箱或綁定手機後進行當前操作
舉報
×
侵犯我的權益
×
侵犯了我企業的權益
×
抄襲了我的內容
×
原文鏈接或出處
誹謗我
×
對根叔社區有害的內容
×
不規範轉載
×
舉報說明
暫無評論