雲ap轉廋ap
- 0關注
- 1收藏，722瀏覽
問題描述：
怎麼通過AC(WX2520X-LI)去把雲ap（WA6320-C）轉成廋ap
組網及組網描述：
ac旁掛核心，POE交換機連核心
- 2024-07-07提問
- 舉報
-
(0)
隻能登陸到AP上麵切換
3、console口操作，console口登錄方法參考《1.03 設備管理-Console登錄方法》
在AP重啟的時候按住不停地按Ctrl+B進入設備的bootroom菜單，以下標黑部分為設備自動打印部分。
==========================<EXTENDED-BOOTWARE MENU>=============
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
===================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 此處按鍵 Ctrl+F，作用：格式化flash
Warning:All files on flash will be lost! Are you sure to format? [Y/N]Y //輸入Y
...........................................................................................................................
Format success.
==========================<EXTENDED-BOOTWARE MENU>=============
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
===================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): //按鍵Ctrl+Y，設置ap胖模式或者瘦模式
Please select the new mode
Current mode is Fat //提示當前是fat瘦模式
===================================================================
|NO. Mode |
|1 Fat Mode |
|2 Fit Mode |
|0 Exit |
===================================================================
Enter your choice(0-2):2 //輸入2，即fit瘦模式
Changed to fit mode successfully! //修改成fit瘦模式成功
==========================<EXTENDED-BOOTWARE MENU>=============
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
===================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 3 //進入以太口子菜單
==========================<Enter Ethernet SubMenu>====================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
===================================================================
Enter your choice(0-5): 5 //修改以太口參數
==========================<ETHERNET PARAMETER SET>==============
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
===================================================================
Protocol (FTP or TFTP) :ftp TFTP
//忽略輸出內容，直接輸入TFTP，然後回車
Load File Name : wa5300.ipe
//忽略輸出內容，直接輸入wa5300.ipe，然後回車
Target File Name : wa5300.ipe
//忽略輸出內容，直接輸入wa5300.ipe，然後回車
Server IP Address :192.168.0.1
//忽略輸出內容，直接輸入電腦主機的 IP，比如192.168.0.1，然後回車
Local IP Address :192.168.0.50
//忽略輸出內容，直接輸入和電腦主機的ip同一網段，比如192.168.0.50，然後回車
Gateway IP Address :0.0.0.0
//忽略輸出內容，直接回車
備注：注意給電腦手動配置一個與AP同網段的IP地址，保證電腦與AP路由可達
==========================<Enter Ethernet SubMenu>====================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
===================================================================
Enter your choice(0-5): 2 //輸入2，更新版本
Loading.................................................................................................................................Done.
18165760 bytes downloaded!
Image file wa5300-boot.bin is self-decompressing...
Saving file flash:/wa5300-boot.bin .............Done.
Image file wa5300-system.bin is self-decompressing...
Saving file flash:/wa5300-system.bin .......................................
Done.
==========================<Enter Ethernet SubMenu>====================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
===================================================================
Enter your choice(0-5): 0 //輸入0返回
==========================<EXTENDED-BOOTWARE MENU>=============
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
===================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 0 //輸入0，重啟AP
System is starting...
設備啟動完成
Press ENTER to get started.
<H3C> //升級成功
%Dec 15 18:56:54:395 2017 H3C SHELL/5/SHELL_LOGIN: Console logged in from con0.
建議與總結：
先Ctrl+F格式化flash，再Ctrl+Y選擇胖模式，最後加載fit版本。
- 2024-07-07回答
- 評論(2)
- 舉報
-
(0)
//www.yolosolive.com/cn/d_202207/1645404_30005_40.htm#_Toc72757941
參考連接
- 2024-07-07回答
- 評論(4)
- 舉報
-
(0)
編輯答案
親~登錄後才可以操作哦!
確定你的郵箱還未認證，請認證郵箱或綁定手機後進行當前操作
舉報
×
侵犯我的權益
×
侵犯了我企業的權益
×
- 1. 您舉報的內容是什麼？（請在郵件中列出您舉報的內容和鏈接地址）
- 2. 您是誰？（身份證明材料，可以是身份證或護照等證件）
- 3. 是哪家企業？（營業執照，單位登記證明等證件）
- 4. 您與該企業的關係是？（您是企業法人或被授權人，需提供企業委托授權書）
抄襲了我的內容
×
原文鏈接或出處
誹謗我
×
- 1. 您舉報的內容以及侵犯了您什麼權益？（請在郵件中列出您舉報的內容、鏈接地址，並給出簡短的說明）
- 2. 您是誰？（身份證明材料，可以是身份證或護照等證件）
對根叔社區有害的內容
×
不規範轉載
×
舉報說明
telnet到AP上麵，密碼是h3capadmin ，輸入<H3C>ap-mode fit