• 全部
  • 經驗案例
  • 典型配置
  • 技術公告
  • FAQ
  • 漏洞說明
  • 全部
  • 全部
  • 大數據引擎
  • 知了引擎
產品線
搜索
取消
案例類型
發布者
是否解決
是否官方
時間
搜索引擎
匹配模式
高級搜索

交換機端口流量如何查詢?

2024-02-01提問
  • 0關注
  • 0收藏,1531瀏覽
粉絲:0人 關注:3人

問題描述:

最近網速特別慢,懷疑可能有人在下載大文件,所以請問如何查看交換上各個端口的實時流量呢。或者在2層拓撲下,可以實現長時間大流量下載自動關閉或者限製端口的操作碼?謝謝各位老師。

4 個回答
粉絲:8人 關注:0人

dis int 可以看到

看哪一個參數呢,老師。 GigabitEthernet1/0/1 Current state: UP Line protocol state: UP IP packet frame type: Ethernet II, hardware address: 083a-382c-ec6c Description: xushulong Bandwidth: 1000000 kbps Loopback is not set Media type is twisted pair Port hardware type is 1000_BASE_T 1000Mbps-speed mode, full-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled Maximum frame length: 10240 Allow jumbo frames to pass Broadcast max-ratio: 100% Multicast max-ratio: 100% Unicast max-ratio: 100% PVID: 99 MDI type: Automdix Port link-type: Access Tagged VLANs: None Untagged VLANs: 99 Port priority: 0 Last link flapping: 3 weeks 1 days 23 hours 1 minutes Last clearing of counters: Never Current system time:2013-01-23 23:02:10 Last time when physical state changed to up:2013-01-01 00:00:53 Last time when physical state changed to down:2013-01-01 00:00:13 Peak input rate: 0 bytes/sec, at 2013-01-01 00:00:52 Peak output rate: 2211 bytes/sec, at 2013-01-01 00:06:13 Last 300 seconds input: 0 packets/sec 0 bytes/sec 0% Last 300 seconds output: 3 packets/sec 870 bytes/sec 0% Input (total): 0 packets, 0 bytes 0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses Input (normal): 0 packets, - bytes 0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses Input: 0 input errors, 0 runts, 0 giants, 0 throttles 0 CRC, 0 frame, - overruns, 0 aborts - ignored, - parity errors Output (total): 5114961 packets, 1072015754 bytes 49453 unicasts, 1280940 broadcasts, 3784568 multicasts, 0 pauses Output (normal): 5114961 packets, - bytes 49453 unicasts, 1280940 broadcasts, 3784568 multicasts, 0 pauses Output: 0 output errors, - underruns, - buffer failures 0 aborts, 0 deferred, 0 collisions, 0 late collisions 0 lost carrier, - no carrier

CrazyPanda 發表時間:2024-02-01 更多>>

看哪一個參數呢,老師。 GigabitEthernet1/0/1 Current state: UP Line protocol state: UP IP packet frame type: Ethernet II, hardware address: 083a-382c-ec6c Description: xushulong Bandwidth: 1000000 kbps Loopback is not set Media type is twisted pair Port hardware type is 1000_BASE_T 1000Mbps-speed mode, full-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled Maximum frame length: 10240 Allow jumbo frames to pass Broadcast max-ratio: 100% Multicast max-ratio: 100% Unicast max-ratio: 100% PVID: 99 MDI type: Automdix Port link-type: Access Tagged VLANs: None Untagged VLANs: 99 Port priority: 0 Last link flapping: 3 weeks 1 days 23 hours 1 minutes Last clearing of counters: Never Current system time:2013-01-23 23:02:10 Last time when physical state changed to up:2013-01-01 00:00:53 Last time when physical state changed to down:2013-01-01 00:00:13 Peak input rate: 0 bytes/sec, at 2013-01-01 00:00:52 Peak output rate: 2211 bytes/sec, at 2013-01-01 00:06:13 Last 300 seconds input: 0 packets/sec 0 bytes/sec 0% Last 300 seconds output: 3 packets/sec 870 bytes/sec 0% Input (total): 0 packets, 0 bytes 0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses Input (normal): 0 packets, - bytes 0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses Input: 0 input errors, 0 runts, 0 giants, 0 throttles 0 CRC, 0 frame, - overruns, 0 aborts - ignored, - parity errors Output (total): 5114961 packets, 1072015754 bytes 49453 unicasts, 1280940 broadcasts, 3784568 multicasts, 0 pauses Output (normal): 5114961 packets, - bytes 49453 unicasts, 1280940 broadcasts, 3784568 multicasts, 0 pauses Output: 0 output errors, - underruns, - buffer failures 0 aborts, 0 deferred, 0 collisions, 0 late collisions 0 lost carrier, - no carrier

CrazyPanda 發表時間:2024-02-01
CrazyPanda 知了小白
粉絲:0人 關注:3人

看哪一個參數,老師。

GigabitEthernet1/0/1
Current state: UP
Line protocol state: UP
IP packet frame type: Ethernet II, hardware address: 083a-382c-ec6c
Description: xushulong
Bandwidth: 1000000 kbps
Loopback is not set
Media type is twisted pair
Port hardware type is 1000_BASE_T
1000Mbps-speed mode, full-duplex mode
Link speed type is autonegotiation, link duplex type is autonegotiation
Flow-control is not enabled
Maximum frame length: 10240
Allow jumbo frames to pass
Broadcast max-ratio: 100%
Multicast max-ratio: 100%
Unicast max-ratio: 100%
PVID: 99
MDI type: Automdix
Port link-type: Access
Tagged VLANs: None
Untagged VLANs: 99
Port priority: 0
Last link flapping: 3 weeks 1 days 23 hours 1 minutes
Last clearing of counters: Never
Current system time:2013-01-23 23:02:10
Last time when physical state changed to up:2013-01-01 00:00:53
Last time when physical state changed to down:2013-01-01 00:00:13
Peak input rate: 0 bytes/sec, at 2013-01-01 00:00:52
Peak output rate: 2211 bytes/sec, at 2013-01-01 00:06:13
Last 300 seconds input: 0 packets/sec 0 bytes/sec 0%
Last 300 seconds output: 3 packets/sec 870 bytes/sec 0%
Input (total): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Input (normal): 0 packets, - bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Input: 0 input errors, 0 runts, 0 giants, 0 throttles
0 CRC, 0 frame, - overruns, 0 aborts
- ignored, - parity errors
Output (total): 5114961 packets, 1072015754 bytes
49453 unicasts, 1280940 broadcasts, 3784568 multicasts, 0 pauses
Output (normal): 5114961 packets, - bytes
49453 unicasts, 1280940 broadcasts, 3784568 multicasts, 0 pauses
Output: 0 output errors, - underruns, - buffer failures
0 aborts, 0 deferred, 0 collisions, 0 late collisions
0 lost carrier, - no carrier

以上命令可看接口帶寬使用率

zhiliao_06y3hs 發表時間:2024-02-01 更多>>

dis counters inbound/outbound interface GE1/0/1

zhiliao_06y3hs 發表時間:2024-02-01

以上命令可看接口帶寬使用率

zhiliao_06y3hs 發表時間:2024-02-01
粉絲:1人 關注:0人

網速慢,首先確定您的寬帶是多大的

直連光貓測速多少

過路由器網速如何

過交換機網速如何

一步步排查網速是在哪個部分開始變慢的

zhiliao_c3pypu 發表時間:2024-02-01 更多>>

一步步排查網速是在哪個部分開始變慢的

zhiliao_c3pypu 發表時間:2024-02-01
粉絲:107人 關注:1人

配置snmp

結合外部監控軟件係統,比如免費的zabbix或者華三的IMC+NTA組件實現監控

編輯答案

你正在編輯答案

如果你要對問題或其他回答進行點評或詢問,請使用評論功能。

分享擴散:

提出建議

    +

親~登錄後才可以操作哦!

確定

親~檢測到您登陸的賬號未在http://hclhub.h3c.com進行注冊

注冊後可訪問此模塊

跳轉hclhub

你的郵箱還未認證,請認證郵箱或綁定手機後進行當前操作

舉報

×

侵犯我的權益 >
對根叔社區有害的內容 >
辱罵、歧視、挑釁等(不友善)

侵犯我的權益

×

泄露了我的隱私 >
侵犯了我企業的權益 >
抄襲了我的內容 >
誹謗我 >
辱罵、歧視、挑釁等(不友善)
騷擾我

泄露了我的隱私

×

您好,當您發現根叔知了上有泄漏您隱私的內容時,您可以向根叔知了進行舉報。 請您把以下內容通過郵件發送到pub.zhiliao@h3c.com 郵箱,我們會盡快處理。
  • 1. 您認為哪些內容泄露了您的隱私?(請在郵件中列出您舉報的內容、鏈接地址,並給出簡短的說明)
  • 2. 您是誰?(身份證明材料,可以是身份證或護照等證件)

侵犯了我企業的權益

×

您好,當您發現根叔知了上有關於您企業的造謠與誹謗、商業侵權等內容時,您可以向根叔知了進行舉報。 請您把以下內容通過郵件發送到 pub.zhiliao@h3c.com 郵箱,我們會在審核後盡快給您答複。
  • 1. 您舉報的內容是什麼?(請在郵件中列出您舉報的內容和鏈接地址)
  • 2. 您是誰?(身份證明材料,可以是身份證或護照等證件)
  • 3. 是哪家企業?(營業執照,單位登記證明等證件)
  • 4. 您與該企業的關係是?(您是企業法人或被授權人,需提供企業委托授權書)
我們認為知名企業應該坦然接受公眾討論,對於答案中不準確的部分,我們歡迎您以正式或非正式身份在根叔知了上進行澄清。

抄襲了我的內容

×

原文鏈接或出處

誹謗我

×

您好,當您發現根叔知了上有誹謗您的內容時,您可以向根叔知了進行舉報。 請您把以下內容通過郵件發送到pub.zhiliao@h3c.com 郵箱,我們會盡快處理。
  • 1. 您舉報的內容以及侵犯了您什麼權益?(請在郵件中列出您舉報的內容、鏈接地址,並給出簡短的說明)
  • 2. 您是誰?(身份證明材料,可以是身份證或護照等證件)
我們認為知名企業應該坦然接受公眾討論,對於答案中不準確的部分,我們歡迎您以正式或非正式身份在根叔知了上進行澄清。

對根叔社區有害的內容

×

垃圾廣告信息
色情、暴力、血腥等違反法律法規的內容
政治敏感
不規範轉載 >
辱罵、歧視、挑釁等(不友善)
騷擾我
誘導投票

不規範轉載

×

舉報說明