怎麼用命令行配置無線模板無線射頻，讓ap上線

您好，請知：

以下是AP上線的配置案例，請參考：

1.18  AP管理典型配置舉例

1.18.1  通過DHCP發現方式建立CAPWAP隧道配置舉例

1. 組網需求

AP通過DHCP選項方式從DHCP server上獲取AP和AC的IP地址，發現AC並與AC建立CAPWAP隧道連接。

2. 組網圖

圖1-4 通過DHCP發現方式建立CAPWAP隧道組網圖

3. 配置步驟

(1)     配置DHCP server

# 使能DHCP服務器功能。

<DHCP Server> system-view

[DHCP Server] dhcp enable

# 配置DHCP地址池1。

[DHCP Server] dhcp server ip-pool 1

[DHCP Server-dhcp-pool-1] network 1.1.1.0 mask 255.255.255.0

# 通過自定義選項的方式配置Option 43的內容，為AP指定AC的IP地址1.1.1.3，注意Option 43選項內容中最後四字節為01010103（1.1.1.3），即為AC的IP地址。

[DHCP Server-dhcp-pool-1] option 43 hex 800700000101010103

[DHCP Server-dhcp-pool-1] quit

[DHCP Server] quit

(2)     配置AC

# 配置AC的VLAN-interface 1的IP地址為1.1.1.3/24。

<AC> system-view

[AC] interface vlan-interface 1

[AC-Vlan-interface1] ip address 1.1.1.3 24

# 創建手工AP，名稱為ap1，配置序列號為219801A28N819CE0002T。

[AC] wlan ap ap1 model WA6320

[AC-wlan-ap-ap1] serial-id 219801A28N819CE0002T

[AC-wlan-ap-ap1] quit

# AP啟動後，DHCP server會給AP自動分配IP地址1.1.1.2，同時由於Option 43選項攜帶AC的IP地址1.1.1.3。AP擁有了自動分配的本地IPv4地址和需要建立關聯的AC的IP地址1.1.1.3，就會開始發現AC的過程並建立CAPWAP隧道。

4. 驗證配置

# 查看AP的詳細信息，可以看到AP與AC成功建立隧道連接並進入Run狀態，發現方式為DHCP選項方式。

[AC] display wlan ap name ap1 verbose

AP name                       : ap1

AP ID                         : 1

AP group name                 : default-group

State                         : Run

Backup Type                   : Master

Ready-for-Switchover          : Not ready

Online time                   : 0 days 1 hours 25 minutes 12 seconds

System up time                : 0 days 2 hours 22 minutes 12 seconds

Model                         : WA6320

Region code                   : CN

Region code lock              : Disable

Serial ID                     : 219801A28N819CE0002T

MAC address                   : 0AFB-423B-893C

IP address                    : 1.1.1.2

UDP port number               : 18313

H/W version                   : Ver.C

S/W version                   : E2321

Boot version                  : 1.01

USB state                     : N/A

Power level                   : N/A

Power info                    : N/A

Description                   : wtp1

Priority                      : 4

Echo interval                 : 10 seconds

Echo count                    : 3 counts

Keepalive interval            : 10 seconds

Discovery-response wait-time  : 2 seconds

Statistics report interval    : 50 seconds

Fragment size (data)          : 1500

Fragment size (control)       : 1450

MAC type                      : Local MAC & Split MAC

Tunnel mode                   : Local Bridging & 802.3 Frame & Native Frame

Discovery type                : DHCP

Retransmission count          : 3

Retransmission interval       : 5 seconds

Firmware upgrade              : Enabled

Sent control packets          : 1

Received control packets      : 1

Echo requests                 : 147

Lost echo responses           : 0

Average echo delay            : 3

Last reboot reason            : User soft reboot

Latest IP address             : 10.1.0.2

Current AC IP                 : N/A

Tunnel down reason            : Request wait timer expired

Connection count              : 1

Backup Ipv4                   : Not configured

Backup Ipv6                   : Not configured

Tunnel encryption             : Disabled

>>LED mode                      : Normal

Remote configuration          : Enabled

Radio 1:

    Basic BSSID               : 7848-59f6-3940

    Admin state               : Up

    Radio type                : 802.11ac

    Antenna type              : internal

    Client dot11ac-only       : Disabled

    Client dot11n-only        : Disabled

    Channel bandwidth         : 20/40/80MHz

    Operating bandwidth       : 20/40/80MHz

    Secondary channel offset  : SCB

    Short GI for 20MHz        : Supported

    Short GI for 40MHz        : Supported

    Short GI for 80MHz        : Supported

    Short GI for 160MHz       : Not supported

    mimo                      : Not Config

    Green-Energy-Management   : Disabled

    A-MSDU                    : Enabled

    A-MPDU                    : Enabled

    LDPC                      : Not Supported

    STBC                      : Supported

    Operational VHT-MCS Set:

        Mandatory             : Not configured

        Supported             : NSS1 0,1,2,3,4,5,6,7,8,9

                                NSS2 0,1,2,3,4,5,6,7,8,9

        Multicast             : Not configured

    Operational HT MCS Set:

        Mandatory             : Not configured

        Supported             : 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,

                                10, 11, 12, 13, 14, 15

        Multicast             : Not configured

    Channel                   : 44(auto)

    Channel usage(%)          : 15

    Max power                 : 20 dBm

    Operational rate:

        Mandatory             : 6, 12, 24 Mbps

        Multicast             : Auto

        Supported             : 9, 18, 36, 48, 54 Mbps

        Disabled              : Not configured

    Distance                  : 1 km

    ANI                       : Enabled

    Fragmentation threshold   : 2346 bytes

    Beacon interval           : 100 TU

    Protection threshold      : 2346 bytes

    Long retry threshold      : 4

    Short retry threshold     : 7

    Maximum rx duration       : 2000 ms

    Noise Floor               : -102 dBm

    Smart antenna             : Enabled

    Smart antenna policy      : Auto

    Protection mode           : rts-cts

    Continuous mode           : N/A

    HT protection mode        : No protection

Radio 2:

    Basic BSSID               : 7848-59f6-3950

    Admin state               : Down

    Radio type                : 802.11n(2.4GHz)

    Antenna type              : internal

    Client dot11n-only        : Disabled

    Channel bandwidth         : 20/40MHz

    Secondary channel offset  : SCA

    Channel auto-switch       : Enabled

    Short GI for 20MHz        : Supported

    Short GI for 40MHz        : Supported

    A-MSDU                    : Enabled

    A-MPDU                    : Enabled

    LDPC                      : Not Supported

    STBC                      : Supported

    Operational HT MCS Set:

        Mandatory             : Not configured

        Supported             : 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,

                                10, 11, 12, 13, 14, 15, 16, 17,

                                18, 19, 20, 21, 22, 23, 24, 25,

                                26, 27, 28, 29, 30, 31

        Multicast             : Not configured

    Channel                   : 5(auto)

    Channel usage(%)          : 0

    Max power                 : 20 dBm

    Preamble type             : Short

    Operational rate:

        Mandatory             : 1, 2, 5.5, 11 Mbps

        Multicast             : Auto

        Supported             : 6, 9, 12, 18, 24, 36, 48, 54 Mbps

        Disabled              : Not configured

    Distance                  : 1 km

    ANI                       : Enabled

    Fragmentation threshold   : 2346 bytes

    Beacon interval           : 100 TU

    Protection threshold      : 2346 bytes

    Long retry threshold      : 4

    Short retry threshold     : 7

    Maximum rx duration       : 2000 ms

    Noise Floor               : 0 dBm

    Smart antenna             : Enabled

    Smart antenna policy      : Auto

    Protection mode           : rts-cts

    Continuous mode           : N/A

    HT protection mode        : No protection