H3C 5560S-EI交換機配置與恢複具體的操作步驟是啥?

方法一：

<H3C>reset saved-configuration   //清空交換機配置

The saved configuration file will be erased. Are you sure? [Y/N]:y   //設備提示保存的配置將會被刪除，是否繼續。

Configuration file in flash: is being cleared. Please wait ... 

MainBoard:

 Configuration file is cleared.   //配置已被清空

<H3C>reboot   //重啟交換機

Start to check configuration with next startup configuration file, please wait.........DONE!

 Current configuration may be lost after the reboot, save current configuration? [Y/N]:n   //設備提示會在重啟後丟失當前配置，是否保存當前配置，選擇n

This command will reboot the device. Continue? [Y/N]:y   //設備提示設備將會重啟，是否繼續，選擇Y

Now rebooting, please wait... 

%Dec 14 20:48:39:352 2019 SW1 DEV/5/SYSTEM_REBOOT: System is rebooting now. 

方法二：

<H3C>dir  //通過dir命令查看交換機的文件

Directory of flash:

   0 drw-           - Dec 14 2019 20:37:24   diagfile

   1 -rw-        1554 Dec 14 2019 20:50:06   ifindex.dat

   2 -rw-       21632 Dec 14 2019 20:37:24   licbackup

   3 drw-           - Dec 14 2019 20:37:24   license

   4 -rw-       21632 Dec 14 2019 20:37:24   licnormal

   5 drw-           - Dec 14 2019 20:48:38   logfile

   6 -rw-           0 Dec 14 2019 20:37:24   s5820v2_5830v2-cmw710-boot-a7514.bin

   7 -rw-           0 Dec 14 2019 20:37:24   s5820v2_5830v2-cmw710-system-a7514.bin

   8 drw-           - Dec 14 2019 20:37:24   seclog

   9 -rw-        6118 Dec 14 2019 20:50:06   startup.cfg  //這個是啟動的交換機配置，我們要刪除此文件

  10 -rw-      110464 Dec 14 2019 20:50:06   startup.mdb

1046512 KB total (1046300 KB free)

<H3C>delete startup.cfg   //使用刪除命令刪除startup.cfg這個啟動運行的配置文件

Delete flash:/startup.cfg? [Y/N]:y   //設備提示是否要刪除，選擇Y

Deleting file flash:/startup.cfg... Done.   //設備提示startup.cfg這個文件已刪除完成

<H3C>reboot   //重啟交換機

Start to check configuration with next startup configuration file, please wait.........DONE!

 Current configuration may be lost after the reboot, save current configuration? [Y/N]:n   //設備提示會在重啟後丟失當前配置，是否保存當前配置，選擇n

This command will reboot the device. Continue? [Y/N]:y   //設備提示設備將會重啟，是否繼續，選擇Y

Now rebooting, please wait...