如何查看當前端口的FEC狀態,進入端口配置也沒fec相關操作命令
[H3C]display interface HundredGigE 2/0/54
HundredGigE2/0/54
Current state: UP
Line protocol state: UP
IP packet frame type: Ethernet II, hardware address: 6893-20b5-c3cb
Description: HundredGigE2/0/54 Interface
Bandwidth: 100000000 kbps
Loopback is not set
Media type is optical fiber, port hardware type is 100G_BASE_SR4_QSFP28
100Gbps-speed mode, full-duplex mode
Link speed type is autonegotiation, link duplex type is autonegotiation
Flow-control is not enabled
Maximum frame length: 10000
Allow jumbo frames to pass
Broadcast max-ratio: 100%
Multicast max-ratio: 100%
Unicast max-ratio: 100%
PVID: 1
MDI type: Automdix
Port link-type: Access
Tagged VLANs: None
Untagged VLANs: 1
Port priority: 0
Last link flapping: 0 hours 0 minutes 43 seconds
Last clearing of counters: Never
Peak input rate: 15 bytes/sec, at 2071-07-03 10:17:31
Peak output rate: 75 bytes/sec, at 2071-07-02 17:03:33
Last 300 second input: 0 packets/sec 0 bytes/sec 0%
Last 300 second output: 0 packets/sec 13 bytes/sec 0%
Input (total): 121 packets, 10500 bytes
69 unicasts, 35 broadcasts, 17 multicasts, 0 pauses
Input (normal): 121 packets, - bytes
69 unicasts, 35 broadcasts, 17 multicasts, 0 pauses
(0)
最佳答案
默認是auto的
FEC(Forward Error Correction,前向糾錯)用於報文糾錯,它通過在發送端為數據報文附加糾錯信息,在接收端利用糾錯信息來糾正數據報文在傳輸時產生的錯誤碼,以提高傳輸質量。用戶需要根據實際情況來選擇FEC模式。
本係列交換機100GE和25GE以太網接口支持FEC功能,僅25GE以太網接口工作在25Gbps速率時支持通過命令行配置本功能。
用戶需要保證鏈路兩端使用的FEC模式一致。
(1) 進入係統視圖。
system-view
(2) 進入以太網接口視圖。
interface interface-type interface-number
(3) 配置接口的FEC模式。
port fec mode { auto | base-r | none | rs-fec }
缺省情況下,接口的FEC模式處於自協商模式。
(0)
親~登錄後才可以操作哦!
確定你的郵箱還未認證,請認證郵箱或綁定手機後進行當前操作
舉報
×
侵犯我的權益
×
侵犯了我企業的權益
×
抄襲了我的內容
×
原文鏈接或出處
誹謗我
×
對根叔社區有害的內容
×
不規範轉載
×
舉報說明
麻煩采納