ARP/4/ARP SENDER MACIPCONFLICT_ALARM:-Chassis=1-Slot=0:ARP packet arrived at Vlan-interface4094 withon flicting MAc and ip addresses Conflict sender MAC=78a1-3e0f-6e01: conflict sender IP=1.1.1.1;Target MAC=0000-0000-)000: TargetIP=1.1.1.2,SVLAN=4094;CVLAN=65535; Input Physical Interface=Bridge-Aggrefation25
(0)
最佳答案
源mac追一下
(0)
下行口有透傳,但是為什麼會產生這條告警信息呢?
這個MAC是核心自己的vlanif地址 dis inter vlan 4094 Vlan-interface4094 Current state: UP Line protocol state: UP Description: For-MAD-BFD Bandwidth: 10000000 kbps Maximum transmission unit: 1500 Internet address: 1.1.1.1/30 (MAD) IP packet frame type: Ethernet II, hardware address: 78a1-3e0f-6e01 IPv6 packet frame type: Ethernet II, hardware address: 78a1-3e0f-6e01 Last clearing of counters: 19:11:46 Sun 11/17/2024 Last 300 seconds input rate: 56 bytes/sec, 448 bits/sec, 0 packets/sec Last 300 seconds output rate: 756 bytes/sec, 6048 bits/sec, 10 packets/sec Input: 5482137 packets, 357803148 bytes, 0 drops Output: 8297603 packets, 580832162 bytes, 0 drops
還有一條日誌是:ARP/4/ARP SENDER MACIPCONFLICT_ALARM:-Chassis=1-Slot=0:ARP packet arrived at Vlan-interface4094 withon flicting MAc and ip addresses Conflict sender MAC=78a1-3e0f-6e01: conflict sender IP=1.1.1.1;Target MAC=0000-0000-)000: TargetIP=1.1.1.2,SVLAN=4094;CVLAN=65535; Input Physical Interface=GE1/0/0/24 24口是MAD的物理接口
下行口有透傳,但是為什麼會產生這條告警信息呢?
配置發出來看下吧
(0)
interface Vlan-interface4094 description For-MAD-BFD mad bfd enable mad ip address 1.1.1.1 255.255.255.252 member 1 mad ip address 1.1.1.2 255.255.255.252 member 2 PS:vlan 4094在其他業務接口也放通了
interface Vlan-interface4094 description For-MAD-BFD mad bfd enable mad ip address 1.1.1.1 255.255.255.252 member 1 mad ip address 1.1.1.2 255.255.255.252 member 2 PS:vlan 4094在其他業務接口也放通了
親~登錄後才可以操作哦!
確定你的郵箱還未認證,請認證郵箱或綁定手機後進行當前操作
舉報
×
侵犯我的權益
×
侵犯了我企業的權益
×
抄襲了我的內容
×
原文鏈接或出處
誹謗我
×
對根叔社區有害的內容
×
不規範轉載
×
舉報說明
對,但是這個應該算是配置不規範的問題,根因還是為啥會有這個衝突出來