MSR2600-10-x

就是參考的這個 是否與版本有關？ [H3C-MSR2600-GigabitEthernet0/1]sflow counter interval 120 [H3C-MSR2600-GigabitEthernet0/1]sf [H3C-MSR2600-GigabitEthernet0/1]sflow c [H3C-MSR2600-GigabitEthernet0/1]sflow counter co [H3C-MSR2600-GigabitEthernet0/1]sflow counter collector 1 [H3C-MSR2600-GigabitEthernet0/1]sf [H3C-MSR2600-GigabitEthernet0/1]sflow sa [H3C-MSR2600-GigabitEthernet0/1]sflow sampling-m [H3C-MSR2600-GigabitEthernet0/1]sflow sampling-mode de [H3C-MSR2600-GigabitEthernet0/1]sflow sampling-mode determine [H3C-MSR2600-GigabitEthernet0/1]sf [H3C-MSR2600-GigabitEthernet0/1]sflow sa [H3C-MSR2600-GigabitEthernet0/1]sflow sampling-r [H3C-MSR2600-GigabitEthernet0/1]sflow sampling-rate 4000 The interface doesn't support the operation. [H3C-MSR2600-GigabitEthernet0/1]display sflow sFlow datagram version: 5 Global information: Agent IP: xxx.xxx.xxx.xxx(CLI) Source address: xxx.xxx.xxx.xxx Collector information: ID IP Port Aging Size VPN-instance Description 1 xxx.xxx.xxx.xxx 9996 N/A 1400 "CLI Collector" Port information: Interface CID Interval(s) FID MaxHLen Rate Mode Status GE0/0 1 60 1 128 0 Determine Suspended GE0/1 1 120 1 256 0 Determine Active

配置沒問題的話 可以抓包看下，排除下對端服務器的問題，可以升級下版本試試

服務端能抓到包 包大小為250,data 長不208 解包第一字節 0X0005 對應版本號也是對的 .

是按文檔配了,發現 端口采樣率配不上 [H3C-MSR2600-GigabitEthernet0/1]sflow sampling-rate 2048 The interface doesn't support the operation. NetFlow Anayzer 服務端能抓到包 但沒能識別到 不知是版本問題還是什麼問題

看故障分析中有一點: · 接口未配置sFlow采樣，導致沒有接口提供采樣數據； 而在配置時剛好有這個錯 [H3C-MSR2600-GigabitEthernet0/1]sflow sampling-rate 2048 The interface doesn't support the operation.