[H3C]ip http enable
Info: HTTP server has been started!
[H3C]inf
[H3C]int
[H3C]interface vla
[H3C]interface Vlan-interface 1
[H3C-Vlan-interface1]ip 192.168.0.58 255.255.255.0
^
% Unrecognized command found at '^' position.
[H3C-Vlan-interface1]ip address 192.168.0.58 255.255.255.0
[H3C-Vlan-interface1]qu
[H3C]lo
[H3C]local-user abc
New local user added.
[H3C-luser-abc]pa
[H3C-luser-abc]password sim
[H3C-luser-abc]password simple 123456
[H3C-luser-abc]se
[H3C-luser-abc]service-type web
^
% Unrecognized command found at '^' position.
[H3C-luser-abc]service-type ?
ftp FTP service type
lan-access LAN-ACCESS service type
portal Portal service type
ppp Specify user type to ppp
ssh Secure Shell service type
telnet TELNET service type
terminal TERMINAL service type
[H3C-luser-abc]service-type
^
% Incomplete command found at '^' position.
[H3C-luser-abc]qu
[H3C]dis v
[H3C]dis version
H3C Comware Platform Software
Comware Software, Version 5.20, Release 5116P20
Copyright (c) 2004-2011 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
H3C SecPath U200-C uptime is 0 week, 0 day, 0 hour, 26 minutes
CPU type: RMI XLS404 800MHz CPU
512M bytes DDR2 SDRAM Memory
32M bytes Flash Memory
247M bytes CF0 Card
PCB Version:Ver.B
Logic Version: 3.0
Basic BootWare Version: 1.32
Extend BootWare Version: 1.32
[FIXED PORT] CON (Hardware)Ver.B, (Driver)1.0, (Cpld)3.0
[FIXED PORT] GE0/0 (Hardware)Ver.B, (Driver)1.0, (Cpld)3.0
[FIXED PORT] GE0/1 (Hardware)Ver.B, (Driver)1.0, (Cpld)3.0
[FIXED PORT] GE0/2 (Hardware)Ver.B, (Driver)1.0, (Cpld)3.0
[FIXED PORT] GE0/3 (Hardware)Ver.B, (Driver)1.0, (Cpld)3.0
[FIXED PORT] GE0/4 (Hardware)Ver.B, (Driver)1.0, (Cpld)3.0
[SUBCARD 1] NSQ1WLAN0 (Hardware)Ver.D, (Driver)1.0, (Cpld)1.0
[H3C]
(0)
最佳答案
service-type後麵telnet跟terminal都加上,web就打開了
(0)
接網線的口還要劃vlan嗎 interface Vlan-interface1 ip address 192.168.1.1 255.255.255.0 # interface GigabitEthernet0/0 port link-mode route # interface GigabitEthernet0/1 port link-mode route # interface GigabitEthernet0/2 port link-mode route # interface GigabitEthernet0/3 port link-mode route # interface GigabitEthernet0/4 port link-mode route
你這不都是三層口嗎
訪問不了
可以約個時間遠程協助一下嗎
你這是防火牆,應該是ip https enable
還是原V5的 U200-C的安全設備
這台設備是支持web的 web:表示Web用戶。
檢查配置命令的權限是管理員3級別
[H3C-luser-abc]service-type ? 確實沒有看到有web服務
ftp FTP service type
lan-access LAN-ACCESS service type
portal Portal service type
ppp Specify user type to ppp
ssh Secure Shell service type
telnet TELNET service type
terminal TERMINAL service type
(0)
親~登錄後才可以操作哦!
確定你的郵箱還未認證,請認證郵箱或綁定手機後進行當前操作
舉報
×
侵犯我的權益
×
侵犯了我企業的權益
×
抄襲了我的內容
×
原文鏈接或出處
誹謗我
×
對根叔社區有害的內容
×
不規範轉載
×
舉報說明
你這是防火牆,應該是ip https enable