rbm建立後顯示和官網操作不一樣

按照官網1.24.2章節做的，為什麼我做出來的和官網的不一樣

//www.yolosolive.com/cn/d_202402/2053482_30005_0.htm#_Toc157968620

RBM_P[DeviceA]display remote-backup-group status 

Local remote backup group information:

  Backup mode: Active/standby

  Device management role: Primary

  Device running status: Standby

  Data channel interface: GigabitEthernet1/0/3

  Data channel interface current state: Up

  Data channel mode: Layer2

  Local IP: 10.2.1.1

  Remote IP: 10.2.1.2    Destination port: 60064

  Control channel status: Connected

  Keepalive interval: 1s

  Keepalive count: 10

  Configuration consistency check interval: 12 hour

  Configuration consistency check result: Not Performed

  Configuration backup status: Auto sync enabled

  Static route backup status: Disabled

  Running-data auto sync status: Enabled

  Session backup status: Hot backup enabled

  Mirroring Status:Disabled

  Uptime since last switchover: 0 days, 0 hours, 33 minutes

Peer remote backup group information:

  Backup mode: Active/standby

  Device management role: Secondary

  Device running status: Active

  Data channel interface: GigabitEthernet1/0/3

  Data channel interface current state: Up

  Local IP: 10.2.1.2

  Remote IP: 10.2.1.1    Destination port: 60064

  Control channel status: Connected

  Keepalive interval: 1s

  Keepalive count: 10

  Configuration consistency check interval: 12 hour

  Configuration consistency check result: Not Performed

  Configuration backup status: Auto sync enabled

  Static route backup status: Disabled

  Running-data auto sync status: Enabled

  Session backup status: Hot backup enabled

Switchover records:

    Time                  Status change        Cause

    2024-06-20 15:44:49   Active to Standby    Keepalive link established

    2024-06-20 15:10:27   Initial to Active    HA Configuration changed

RBM_S<DeviceB>display remote-backup-group status

Local remote backup group information:

  Backup mode: Active/standby

  Device management role: Secondary

  Device running status: Active

  Data channel interface: GigabitEthernet1/0/3

  Data channel interface current state: Up

  Data channel mode: Layer2

  Local IP: 10.2.1.2

  Remote IP: 10.2.1.1    Destination port: 60064

  Control channel status: Connected

  Keepalive interval: 1s

  Keepalive count: 10

  Configuration consistency check interval: 12 hour

  Configuration consistency check result: Not Performed

  Configuration backup status: Auto sync enabled

  Static route backup status: Disabled

  Running-data auto sync status: Enabled

  Session backup status: Hot backup enabled

  Mirroring Status:Disabled

  Uptime since last switchover: 0 days, 1 hours, 1 minutes

Peer remote backup group information:

  Backup mode: Active/standby

  Device management role: Primary

  Device running status: Standby

  Data channel interface: GigabitEthernet1/0/3

  Data channel interface current state: Up

  Local IP: 10.2.1.1

  Remote IP: 10.2.1.2    Destination port: 60064

  Control channel status: Connected

  Keepalive interval: 1s

  Keepalive count: 10

  Configuration consistency check interval: 12 hour

  Configuration consistency check result: Not Performed

  Configuration backup status: Auto sync enabled

  Static route backup status: Disabled

  Running-data auto sync status: Enabled

  Session backup status: Hot backup enabled

Switchover records:

    Time                  Status change        Cause

    2024-06-20 15:44:49   Active to Active     Keepalive link established

    2024-06-20 15:17:07   Initial to Active    HA Configuration changed

RBM_S<DeviceB>

RBM_S<DeviceB>display vrrp

IPv4 Virtual Router Information:  

 Running mode      : Standard

 RBM control channel is established

 RBM collaboration mode: All VRRP groups

   VRRP active group status : Master

   VRRP standby group status: Master

 Total number of virtual routers : 2

 Interface          VRID  State        Running Adver   Auth             Virtual

                                       Pri     Timer   Type             IP

 ----------------------------------------------------------------------------

 GE1/0/1            1     Master       100     100     Not supported    2.1.1.3         

 GE1/0/2            2     Master       100     100     Not supported    10.1.1.3