SR6608 E1語音傳輸

②E1接口
//配置E1接口工作在非通道化
[Quidway]controller E1  2/0/0
[Quidway-E1 2/0/0]using e1
生成一個接口：interface Serial2/0/0:0
//配置E1接口工作在CE1通道化(缺省)
[Quidway]controller E1  2/0/0
[Quidway-E1 2/0/0]using ce1
[Quidway-E1 2/0/0]channel-set 20 timeslot-list ?
  INTEGER<1-31>  Timeslots in range, separated by ',' or '-'
[Quidway-E1 2/0/0]channel-set 20 timeslot-list 1,2
[Quidway-E1 2/0/0]
%Jun  4 06:45:52:085 2004 Quidway PHY/2/PHY:    Serial2/0/0:20: change status to up
[Quidway-E1 2/0/0]channel-set 10 timeslot-list 3-7
[Quidway-E1 2/0/0]
%Jun  4 06:48:55:928 2004 Quidway PHY/2/PHY:    Serial2/0/0:10: change status to up
[Quidway]int Serial2/0/0:20
[Quidway-Serial2/0/0:20]ip address 1.1.1.2 24
//配置E1接口工作在PRI通道化
[Quidway]controller E1  2/0/1
[Quidway-E1 2/0/1]using ce1
[Quidway-E1 2/0/1]pri-set ?
  timeslot-list  Lists of the timeslots of the PRI set
  <cr>          
[Quidway-E1 2/0/1]pri-set timeslot-list ?
  INTEGER<1-31>  Timeslots in range, separated by ',' or '-'
[Quidway-E1 2/0/1]pri-set timeslot-list 1-15 ?
  <cr> 
[Quidway-E1 2/0/1]pri-set timeslot-list 1-15
[Quidway-E1 2/0/1]
[Quidway-E1 2/0/1]pri-set timeslot-list ?
  INTEGER<1-31>  Timeslots in range, separated by ',' or '-'

[Quidway-E1 2/0/1]pri-set timeslot-list 17,18
 Another pri-set exists.//在一個CE1/PRI接口上同時隻能捆綁出一個pri set。
[Quidway-E1 2/0/1]dis cur

#
controller E1 2/0/0
 channel-set 20 timeslot-list 1-2
 channel-set 10 timeslot-list 3-7
#
controller E1 2/0/1
 pri-set timeslot-list 1-16              
#
interface Aux0
 async mode flow
#
interface Ethernet0/0/0
 ip address dhcp-alloc
#
interface Ethernet0/0/1
 ip address dhcp-alloc
#
interface Serial1/0/0
 link-protocol ppp
 fe1 timeslot-list 1-10
 ip address 1.1.1.1 255.255.255.0
#
interface Serial2/0/0:10
 link-protocol ppp
#
interface Serial2/0/0:20
 link-protocol ppp
#
interface Serial2/0/1:15
 link-protocol ppp
#
return

   通信兩端配置要保持一致（display  fe1 serial x/x 或display controller e1 x/x查看）工作模式（成幀或非成幀）、幀格式、CRC校驗方式、編碼格式、線路空閑碼、幀間填充符。
   CISCO E1接口默認幀格式為CRC4，華三E1接口默認幀格式為NO-CRC4，兩者互聯時請使之保持一致。