olt配置

您好，參考

1.1.9  配置數據/上網業務。

1. 配置規劃

表1-2 數據/上網業務配置表格

2. 配置步驟

# 創建動態二層聚合接口1，並加入4個成員端口。

[OLT] interface Bridge-Aggregation 1

[OLT-Bridge-Aggregation1] link-aggregation mode dynamic

[OLT-Bridge-Aggregation1] quit

[OLT] interface Ten-GigabitEthernet 1/1/0/19

[OLT-Ten-GigabitEthernet1/1/0/19] port link-aggregation group 1

[OLT-Ten-GigabitEthernet1/1/0/19] quit

[OLT] interface Ten-GigabitEthernet 1/1/0/20

[OLT-Ten-GigabitEthernet1/1/0/20] port link-aggregation group 1

[OLT-Ten-GigabitEthernet1/1/0/20] quit

[OLT] interface Ten-GigabitEthernet 2/1/0/19

[OLT-Ten-GigabitEthernet2/1/0/19] port link-aggregation group 1

[OLT-Ten-GigabitEthernet2/1/0/19] quit

[OLT] interface Ten-GigabitEthernet 2/1/0/20

[OLT-Ten-GigabitEthernet2/1/0/20] port link-aggregation group 1

[OLT-Ten-GigabitEthernet2/1/0/20] quit

# 創建業務VLAN 101。

[OLT] vlan 101

# 配置上行口Bridge-Aggregation 1為 Trunk口，並且允許VLAN101通過。

[OLT] interface Bridge-Aggregation 1

[OLT-Bridge-Aggregation1] port link-type trunk

[OLT-Bridge-Aggregation1] undo port trunk permit vlan 1

[OLT-Bridge-Aggregation1] port trunk permit vlan 101

[OLT-Bridge-Aggregation1] quit

# 配置OLT1/1/0/1為 Hybrid口，並且允許VLAN101的報文攜帶VLAN Tag通過。

[OLT] interface olt 1/1/0/1

[OLT-Olt1/1/0/1] port link-type hybrid

[OLT-Olt1/1/0/1] port hybrid vlan 101 tagged

[OLT-Olt1/1/0/1] quit

# 將ONU接入Olt 1/1/0/1，全局已開啟自動綁定ONU功能，ONU接口Onu 1/1/0/1:1將被自動創建， 配置接口Onu 1/1/0/1:1為Trunk口並允許所有VLAN通過。

[OLT] interface onu1/1/0/1:1

[OLT-Onu1/1/0/1:1] port link-type trunk

[OLT-Onu1/1/0/1:1] port trunk permit vlan all

[OLT-Onu1/1/0/1:1] quit

# 配置ONU的UNI端口1的VLAN操作模式為VLAN Trunk模式，為PC上送的Untagged報文打上PVID 101的VLAN Tag。

[OLT] interface onu1/1/0/1:1

[OLT-Onu1/1/0/1:1] uni 1 vlan-mode trunk pvid 101

[OLT-Onu1/1/0/1:1] quit